Calculator
What the IPv4 to IPv6 Converter does
IPv4 to IPv6 Converter: converts Status, Result and IPv4-mapped from IPv4 address and IPv6 format. Example: ipv4 address 192.0.2.10 and ipv6 format IPv4-mapped (::ffff:a.b.c.d) gives status Converted.
Status, Result and IPv4-mapped, derived from IPv4 address and IPv6 format. Each change is reflected immediately, which suits quick what-if comparisons.
Spotting a malformed field is far quicker when the structure is laid out clearly. The IPv4 to IPv6 Converter exists to take that particular chore off your hands.
Payloads stay in the tab, so you can safely paste production data without it reaching a third party.
If you want to check the arithmetic, the field table, the method and a worked example are further down.
What do the IPv4 to IPv6 Converter fields mean?
The IPv4 to IPv6 Converter uses 2 inputs. Every box starts with a working value, so there is a real result on screen before you touch anything.
| Field | What to enter | Default |
|---|---|---|
| IPv4 address | required | 192.0.2.10 |
| IPv6 format | choose from IPv4-mapped (::ffff:a.b.c.d), IPv4-mapped hex (::ffff:c000:020a), IPv4-compatible (::a.b.c.d) legacy or 6to4 (2002:xxxx::/48) | IPv4-mapped (::ffff:a.b.c.d) |
How does the IPv4 to IPv6 Converter work?
Each output is derived from the inputs above in a single pass; there is no hidden state carried between runs, so the same inputs always give the same conversion.
Range checks come first, so the formula only ever sees values it can handle.
Worked example
These are the values the IPv4 to IPv6 Converter loads by default, and the result it produces from them. The figures are the tool’s live defaults and its live output, so you can reproduce them exactly.
| IPv4 address | 192.0.2.10 |
|---|---|
| IPv6 format | IPv4-mapped (::ffff:a.b.c.d) |
| Status | Converted |
|---|---|
| Result | ::ffff:192.0.2.10 |
| IPv4-mapped | ::ffff:192.0.2.10 |
| IPv4-mapped (hex) | ::ffff:c000:020a |
| 6to4 prefix | 2002:c000:020a::/48 |
| Tip | IPv4-mapped (::ffff:) is the common dual-stack form. 6to4 embeds the IPv4 into 2002::/16. |
How to use it
- Fill in IPv4 address.
- Pick a value for IPv6 format: the options are IPv4-mapped (::ffff:a.b.c.d), IPv4-mapped hex (::ffff:c000:020a), IPv4-compatible (::a.b.c.d) legacy or 6to4 (2002:xxxx::/48).
- Type a value and the answer is already there by the time you stop.
- The panel reports Status, Result, IPv4-mapped, IPv4-mapped (hex), 6to4 prefix and Tip.
- The link encodes your inputs, so saving it is enough to reproduce the result later.
What this tool does not do
- Output follows the common convention for this format; a specific toolchain may have its own house style.
- Processing happens in your browser, so very large inputs are bounded by available memory.
- Results are informational: check anything consequential against a second source.
Frequently asked questions
The form asks for IPv4 address and IPv6 format. Defaults are loaded for all of them, letting you treat it as a what-if tool rather than a data-entry form.
With the values loaded when the page opens, status comes out as Converted. That number tracks the inputs, so a small edit shows its sensitivity immediately.
Nothing is stored. The page has no back end to send data to, and holds your input only in memory.
Free, and there is no upsell. The whole tool is the free version.
Full double precision is used throughout; only the displayed figure is shortened.